13.56MHz rfid reader MR760 USB (HID standard)

This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me.

MR760 series, based on NXP SL RC400,RC632 are the desktop reader. The reader supports series IC cards according to ISO15693,ISO14443A, ISO14443B and the reader imitates the USB keyboard to read and output the card data. MR760 IC card is desktop reader/writer with USB interface (HID standard). In the systems of Windows, Linux and other PC systems support USB keyboard, the reader imitates the USB keyboard to operate the card data. With our software and DIP switch, the users can set the reader if to read the number of the card or the data of the card or both. And the data can be positive sequence output or be reverse order output. Meanwhile the users can choose freely the key output such as enter, tab etc. after the output of the number and the data of the card.

The default of the MR760 is configuration mode in factory setting. If you want to let the reader work, you need deploy it through the software and input the configuration information to the reader. We monitor the quality of the products strictly by the introduction of advanced equipment, to ensure that the reader has good quality and stability.

    Qualifications:
    • PCD: NXP RC400,RC632
    • Working frequency: 13.56MHz
    • RF standard: ISO14443A, ISO14443B, ISO15693
    • Operating distance: 100mm (I.CODE SLI, typical distance)
    • SAM card slot: no
    • Interface: USB (HID standard)
    • Power supply: DC5V
    • Power consumption: 0.6W
    • Dimension: 123mm×88mm×25mm
    • Weight: about 150g
    • Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F)
    • Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F)