Fusion Splicer Pt-630

Features
Fiber core can be display clearly
SingleX or Y view and X & Y view simultaneously
Auto check quality of cleaved end face
Auto select best splicing program
9 seconds splice time and 30 seconds heat time
Small bulk and light weigh
5 inch color LCD monitor with clear digital image display
Simple Operation menu
Software upgrade via USB interface
Specification
Model     Pt-630
Applicable fibers     SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T G.655)
Fiber cleaved length     12~16mm（Coating diameter：250μm）    
16mm（Coating diameter: 250 ~ 1000μm）
Fiber diameter     Cladding diameter：80 ~150μm
Coating diameter：100~ 1000μm
Fiber Count     Single
Fiber aligning method     Core aligning
Image processing method     Digital
Actual average splice loss     0.02dB （SM）, 0.01dB (MM),
0.04dB (DS), 0.04dB( NZDS)
Splicing time     Typical 9 sec，with standard SM fiber
Splicing mode      53(templet), 40(user)
Splice loss estimate     More accurate
Return loss     ＞60dB
Storage of splice result     5000 results，3 parameter per result
Fiber display and magnification     400X（X or Y view）,200X（X and Y view）
Tube heating time     Typical 30 sec
Tube heating mode     9(templet), 24(user)
Tube heating temperature     Can be adjusted
Applicable Protection sleeve length     60mm, 40mm and a series of micro sleeves
Tension test     2N
Electrode life     2500
No.of splice/heating with battery     Typical 130 cycles (splice/tube heat) with inner Li-battery
Display screen     5 inch color LCD monitor
Image change over     The fiber image is turned upside down
Terminals     RS 232
Operating condition     0 ~ 5000m above sea level, 0 ~ 95%RH and -10～50℃, respectively, Max. wind velocity of 15m/s
Power supply     AC 100-240V with AC adapter; inner Li-battery(6600mAH)
Dimensions     150mm(L) x150mm (W) x150mm (H)
Weight     2.7 Kg excluding battery,3.2 Kg including battery