JMY505 series are RFID reader/writer module with UART and IIC serial ports. JMY505 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The RF protocol is complex. But the designer combined some frequent used command of RF card and then

JMY506 series are RFID reader/writer module with UART and IIC serial ports. JMY506 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The RF protocol is complex. But the designer combined some frequent used command of RF card and then

This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me.

MR600 series contactless smart reader is the desktop reader bases on NXP PCD or compatible PCD. The reader inlays LED Nixie tube

This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me.

MR761 series, based on NXP PCD, is the desktop reader. The reader supports series IC cards according to ISO14443A, ISO14443B and

This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me.

MR730 series contactless smart reader is the Ethernet interface desktop reader based on NXP PCD or compatible PCD. It doesn't

This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me.

MR760 series, based on NXP SL RC400,RC632 are the desktop reader. The reader supports series IC cards according to

MR800 series for reader/writer with the popular ARM7 microprocessors are of rapid & stable, reliable operation and beautiful appearance. User can choose freely if with the LCD display modul(128x64). They support boot screen & idle screen set and picture storage etc. The interface is USB PC/SC. They

It is the special PP film dielectric for capacitors, and is used widely in capacitors manufacture the material of electrode and Dielectric for metallizing and self-healing capacitor.
According to the used requirement, a layer or more layers of metal are metallized on the surface of the

1.High transparency and gloss
2.High tensile strength
3.High grease barrier
4.Low static electricity
5.Superior thickness uniformity
6.Smooth rolling and neat ends of film rolls
Specifications
Thickness: 4~12 micron
Width: 4~620 mm
Customized dimensions and specifications are available

Polypropylene Film for Type M-PP/S-PP (4um~12 um )
By adopting the imported super high-purity capacitor-grade home-polypropylene resin, The film is made by biaxial-orientation tenter process. The film features excellent Profile evenness, high BDV and high mechanical strength. The winded capacitors

The material of electrode and Dielectric for metallizing and self-healing capacitor,
According to the used requirement, a layer or more layers of metal are metallized on the surface of the film.
It makes the capacitor has a good self-healing.
Thickness uniformity, good wind ability.

Motor Capacitors feature a low-loss, self-healing metallized Polypropylene Film dielectric system, which are oil-filled, and are protected by a 10, 000 AFC UL-approved Safety Pressure Interrupter. The motor run capacitors are offered in voltages ranging from 250 through 660 VAC and with a