Features Core to core alignment by PAS technology ( PAS:Profile Alignment System) Digital fusion splicer with automatic focus function Fiber core can be display clearly Single X or Y view and X & Y view simultaneously Auto detect cleaved endface fault Display fiber cleaved and offset angle Display core and clad offset 5.6 inch TFT color LCD monitor with clear digital image display USB & VGA interface Software upgrade via USB interface Specefications Model KL-300T Applicable fibers SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T G.655) Fiber cleaved length 8~16mm(Coating diameter:250µm) 16mm(Coating diameter: 250 ~ 1000µm) Fiber diameter Cladding diameter:80 ~150µm Coating diameter:100~ 1000μm Fiber Count Single Fiber aligning method Core or clad aligning Image processing method Digital Actual average splice loss 0.02dB (SM), 0.01dB (MM), 0.04dB (DS), 0.04dB( NZDS) Splicing time Typical 9 sec,with standard SM fiber Splicing mode 53(templet), 40(user) Splice loss estimate More accurate Return loss >60dB Storage of splice result 4000 results,20 parameter per result Fiber display and magnification 300X(X or Y view),150X(X and Y view) Tube heating time Typical 30 sec Tube heating mode 9(templet), 24(user) Tube heating temperature Can be adjusted Applicable Protection sleeve length 60mm, 40mm and a series of micro sleeves Tension test 2N Electrode life 2500 No.of splice/heating with battery Typical 150 cycles (splice/tube heat) with inner Li-battery Display screen 5.6 TFT inch color LCD monitor Image change over The fiber image is turned upside down Terminals USB 1.1 and VGA Operating condition 0 ~ 5000m above sea level, 0 ~ 95%RH and -10~50℃, respectively, Max. wind velocity of 15m/s Power supply AC 100-240V with AC adapter; inner Li-battery(6600mAH) Dimensions 150mm(L) x150mm (W) x150mm (H) Weight 2.7 Kg excluding battery,3.2 Kg including battery
SEND INQUIRY
Please fill in fully your information to send email