Hook Strip Flat Shale ShakerScreen

Hook Strip Flat Shale ShakerScreen

Hook strip flat screen are the series applied most widely at present. These products can be fit for all kinds of shale shakers that use the hookstrip flat screen. This screen panel is constructed with two or three stainless steel layers bonded to a steel support plank. Accessary rubber plugs may be inserted to the rips or tears of the screen. By doing this, we can cut down time and the production cost. We can supply hookstrip flat screens with mesh sizes ranging from 12 to 275.

  Features of HOOK STRIPE FLAT PLATE SCREEN
      ⅠDifferent layers with different density. To arrange these layers reasonably and exactly, the screening effect will become more and better. Screen with different mesh counts with suitable opening sizes of the backing plate. Doing so, our products will obtain the largest effective area under the condition of enough strength.
       ⅡThe bottom layer with low mesh counts has coarse wire and can be tight bonded to the backing to make up one block. So the strength of whole screen mesh get up and the useful life is increased

Screen Model     Pange of Mesh     Dimension(Length×Width)     Brand & Model OF Shaker     Weight(Kg)
GKA-1     16-325     903×1155mm     SWACO BEW-3     5.6
GKA-2     16-325     1212×1141mm     SWACO ALS-11     9
GKA-3(PWP)     16-325     697×1050mm     DERRICR FLC500 Series     6
GKA-4(PWP)     16-325     697×1053mm     DERRICR FLC2000     4.2
GKA-5     16-325     697×846mm     DERRICR FLC313M     4
GKA-6(PWP)     16-325     915×1150mm     BRANDT LCM-20     8.6
GKA-7(PWP)     16-325     720×1220mm     KEMTRON KTL48 Series     5.6
GKA-8(PWP)     16-250     700×1165mm     S250     4.6
GKA-9(PWP)     16-250     1186×1280mm     ZX60     9.2
Remarks: All the types above can be produced.
Annie Lu
Huatao Shale Shaker Screen Factory
http://www.shaleshakerscreen.info
annie.lu@huataogroup.com
Tel: +86 0311 80690567
Fax: +86 0311 85866720