identification heat shrink tube

Heat Shrink Identification Tubing(HSID) are designed to meet the wire and cable marking needs of manufacturers with high performance requirements. Made from permanent, flame retarded, radiation cross-linked heat-shrinkable polyolefin.
Features
>Permanent identification sleeves.
>Computer-printable.
>Lightweight for aerospace applications.
>Choice of Military grade & RoHs Compliant Material or Halogen free Material.
>2:1 and 3:1 shrink ratio.
>Flame retardant , VW-1.
>Temperature rating +135℃/275°F
>Quick recovery of heat sensitive areas.
Temperature rating
>Operating temperature range: –55°C to +125°C –67°F to +257°F
>Minimum recovery temperature: +85°C/ +185°F
>Totally shrink temperature: +115°C/+239°F
>Maximum storage temperature +50°C /+122°F
Specification
HSID-2X

Product Number	Expanded As Supplied(mm)	Recovered After Heating(mm)
Inside Diameter	Flat Width	Double Wall Thickness	Inside Diameter	Single Wall Thicknes
HSID-2X-1.6	2.00±0.20	3.7±0.3	0.48±0.10	≤0.79	0.45±0.06
HSID-2X-2.4	2.79±0.20	5.0±0.3	0.48±0.10	≤1.18	0.49±0.06
HSID-2X-3.2	3.64±0.23	6.3±0.4	0.48±0.10	≤1.59	0.51±0.06
HSID-2X-4.8	5.26±0.25	8.9±0.4	0.49±0.10	≤2.36	0.54±0.06
HSID-2X-6.4	6.92±0.28	11.5±0.4	0.50±0.10	≤3.18	0.56±0.06
HSID-2X-9.5	10.2±0.32	16.7±0.5	0.51±0.11	≤4.75	0.59±0.06
HSID-2X-12.7	13.5±0.36	21.8±0.6	0.52±0.11	≤6.35	0.60±0.07
HSID-2X-19.1	20.1±0.40	32.2±0.6	0.53±0.11	≤9.53	0.62±0.07
HSID-2X-25.4	26.7±0.45	42.5±0.7	0.55±0.12	≤12.7	0.63±0.07
HSID-2X-38.0	39.8±0.51	63.2±0.8	0.57±0.12	≤19.1	0.64±0.07
HSID-2X-51.0	53.0±0.56	83.9±0.9	0.58±0.13	≤25.4	0.64±0.08
HSID-2X-76.0	79.4±0.56	125.3±1.0	0.59±0.13	≤38.1	0.64±0.09

HSID-3X

Product Number	Expanded As Supplied(mm)	Recovered After Heating(mm)
Inside Diameter	Flat Width	Double Wall Thickness	Inside Diameter	Single Wall Thickness
HSID-3X-1.6	2.00±0.20	3.7±0.3	0.47±0.10	≤0.53	0.52±0.06
HSID-3X-2.4	2.79±0.20	5.0±0.3	0.47±0.10	≤0.79	0.57±0.06
HSID-3X-3.2	3.64±0.23	6.3±0.4	0.48±0.10	≤1.06	0.61±0.06
HSID-3X-4.8	5.26±0.25	8.9±0.4	0.49±0.10	≤1.59	0.67±0.06
HSID-3X-6.4	6.92±0.28	11.5±0.4	0.50±0.10	≤2.36	0.71±0.06
HSID-3X-9.5	10.2±0.32	16.7±0.5	0.52±0.11	≤3.18	0.77±0.06
HSID-3X-12.7	13.5±0.36	21.8±0.6	0.53±0.11	≤4.75	0.80±0.07
HSID-3X-19.1	20.1±0.40	32.2±0.6	0.55±0.11	≤6.35	0.84±0.07
HSID-3X-25.4	26.7±0.45	42.5±0.7	0.56±0.12	≤8.47	0.86±0.07
HSID-3X-38.0	39.8±0.51	63.2±0.8	0.57±0.12	≤12.9	0.89±0.07
HSID-3X-51.0	53.0±0.56	83.9±0.9	0.57±0.1	≤17.2	0.90±0.08
HSID-3X-76.0	79.4±0.56	125.3±1.0	0.57±0.13	≤25.8	0.92±0.09

Remarks: Two packing ways:
1.Cut in55mm/ pc, adhibit together in a line and packed in roll (T type)
2.Not cut and packed in roll (R type