Contact person: Ms. Rachel Qin
Position: sales
Address: FL12, Building3, Admiral City, No. 131 Minzu Avenue, Nanning, Guangxi, China
Country: China
Phone: 86-771-5738955 - Mobi:
Poly Aluminum Chloride (PAC-S)
Price:
Poly Aluminum Chloride (PAC-S)
PAC-S is made from aluminum hydroxide, synthesis hydrochloric acid and aluminum sulfate by advanced technology. Due to introduction of the S042- ion, it makes them getting better flocculation. The solid product is light yellow produced by spray drying technology,
Characteristics and Performance
* Less dosage, large granule, and quick speed in sedimentation, high quality water after purifying.
* Maintain a good flocculation in Low temperature, low turbidity water.
* With less alkalinity applies to broad scope 5.0-9.0 pH value, lower pH value of water after purification.
* With less soluble salts and dissociative aluminum, benefiting ion exchange and high pure water making.
* Have strong adaptability with different turbidity, alkalinity and organics content.
* Low causticity, solid product easily soluble in water, better than other similar products.
Applications
1. Low temperature and low turbidity water treatment
2. Urban water treatment
3. Oilfield reinjection water treatment
4. Water reuse treatment
Packaging, Transportation and Storage
1. Solid: 25KG/woven bag with PE inner or 20kg/ two-layer-PE bag.
Liquid: Plastic drum or flexi tank
2. The effective storage period is 6 months for liquid product/12 months for solid product. Solid product should be kept in a dry and ventilated place, protected from moisture, but affected with damp does not impact on using.
Notice
In order to achieve best coagulation and economic benefits of the product, quantitative mixing coagulation test is indispensable to determine the best usage before using, and then carry out the productive debugging.
PAC-S is made from aluminum hydroxide, synthesis hydrochloric acid and aluminum sulfate by advanced technology. Due to introduction of the S042- ion, it makes them getting better flocculation. The solid product is light yellow produced by spray drying technology,
Characteristics and Performance
* Less dosage, large granule, and quick speed in sedimentation, high quality water after purifying.
* Maintain a good flocculation in Low temperature, low turbidity water.
* With less alkalinity applies to broad scope 5.0-9.0 pH value, lower pH value of water after purification.
* With less soluble salts and dissociative aluminum, benefiting ion exchange and high pure water making.
* Have strong adaptability with different turbidity, alkalinity and organics content.
* Low causticity, solid product easily soluble in water, better than other similar products.
Applications
1. Low temperature and low turbidity water treatment
2. Urban water treatment
3. Oilfield reinjection water treatment
4. Water reuse treatment
Packaging, Transportation and Storage
1. Solid: 25KG/woven bag with PE inner or 20kg/ two-layer-PE bag.
Liquid: Plastic drum or flexi tank
2. The effective storage period is 6 months for liquid product/12 months for solid product. Solid product should be kept in a dry and ventilated place, protected from moisture, but affected with damp does not impact on using.
Notice
In order to achieve best coagulation and economic benefits of the product, quantitative mixing coagulation test is indispensable to determine the best usage before using, and then carry out the productive debugging.
Quality Standard GB15892-2009 | |||
Item | Item | ||
Liquid | Solid | ||
Al2O3,%,≥ | 10.0 | 29.0 | |
Basicity,% | 40.0-90.0 | ||
Water Insoluble,%,≤ | 0.2 | 0.6 | |
pH Value (1% solution) | 3.5-5.0 | ||
Density (20℃)(g/cm3) ,≥ | 1.12 | ||
As, %,≤ | 0.0002 | ||
Pb,%, ≤ | 0.001 | ||
Cr,%,≤ | 0.0002 | ||
Hg,%,≤ | 0.00001 | ||
Cr6+,%,≤ | 0.0005 |
SEND INQUIRY
Please fill in fully your information to send email
CATEGORY
Agriculture