Supplier: ZHUZHOU INTOP TUNGSTEN CARBIDE CO.,LTD
Contact person: Ms. Elanie wang
Position: China
Address: Tianyuan District, Zhuzhou, Hunan, China, 412007
Country: China
Phone: 86-15886366906 - Mobi: 008615886366906
carbide saw tips
Price: $0.01
carbide saw tip
« Previous
◆We produce according to customer’s request.
Properties of grades
| Grade | Density (g/cm3) | Hardness (HRA) | TRS (MPa) | Average Grain size (ųm) |
| YG6/ K20 | 14.85～15.05 | ≥90.5 | ≥1860 | In |
| YG8/K30 | 14.60～14.85 | ≥89.7 | ≥2060 | In |
| YK08/K40 | 14.50～14.80 | ≥88.0 | ≥2060 | Coarse |
| JX5/K20 | 14.65～14.85 | ≥90.0 | ≥2060 | In |
| YG6X/K10 | 14.70～14.85 | ≥91.7 | ≥1860 | Fine |
| YG8X/K10 | 14.60～14.85 | ≥91.0 | ≥2000 | Fine |
| K10S | 14.70～14.85 | ≥91.7 | ≥3000 | Fine |
| K20S | 14.60～14.80 | ≥91.0 | ≥3000 | Fine |
| K10UF | 14.70～14.95 | ≥93.0 | ≥3000 | Superfine |
| K20UF | 14.50～14.80 | ≥92.0 | ≥3000 | Superfine |
| K30UF | 14.25～14.55 | ≥91.0 | ≥3050 | Superfine |
| R06 | 14.70～14.85 | ≥93.5 | ≥2400 | Superfine |
| R03 | 14.90～15.10 | ≥94.0 | ≥2000 | Superfine |
| YC40 | 12.80～13.30 | ≥89.5 | ≥1700 | In |
| YC501 | 12.70～13.30 | ≥90.5 | ≥1680 | In |
Application recommended
| Grade | Applications recommended |
| YG6/ K20 | For the cutting of ordinary wood, Recommend to use resistance welding,and the temperature should not be too high |
| YG8/K30 | For the cutting of the ordinary wood,also for the aluminum, Recommend to use resistance welding,and the temperature should not be too high |
| YK08/K40 | For the cutting of the recycling wood especially for some iron nails and stones in it, Recommend to use resistance welding,and the temperature should not be too high |
| JX5/K20 | For the cutting of the hard wood/recycling wood and aluminum, Recommend to use resistance welding,and the temperature should not be too high |
| YG6X/K10 | For the cutting of the wood specially, recommend to use the high frequency welding |
| YG8X/K10 | For the cutting of the wood and aluminum specially, Recommend to use the high frequency welding |
| K10S | For the cutting of the hard wood specially, Recommend to use the high frequency welding |
| K20S | For the cutting of the aluminum specially, Recommend to use the high frequency welding |
SEND INQUIRY
Please fill in fully your information to send email
CATEGORY
Agriculture