Contact person: Ms. Joy
Position:
Address: Middle Renmin Road 224, Room 406, Chong'an District
Country: China
Phone: 86051083570133 - Mobi: 8618351580106

Economical GP6020 Horizontal Spline Milling Machine

Price:  

Gear Cutting Machine Manufacturers

PRODUCT DESCRIPTION
Major Functions of the Machine Tool
GP6020 semi-automatic spline shaft milling machine is designed to process straight-slot long spline shaft through hobbing. It can also be used to process straight gear shaft.
Major Performance and Structural Features of the Machine Tool
This machine, by applying electrical hydraulic control, could realize  semi-automatic one-time work cycle, automatically completing the following action: Rapid approaching of milling head; vertical cutting of the slide; rapid return of the milling head; rapid return of the slide
The machine has a mechanism that could eliminate the gap between feed screws and nuts, and perform hydraulic control against tensioned workpiece at down milling tailstock
1. Lathe Bed
The lathe bed is a rectangular box with sufficient rigidity. On the left side of the bed locate the electrical box, the main motor and the fast motor. On the right side of the bed locates the hydraulic control equipment. The cooling pump motor and coolant tank are located in the middle of the hydraulic oil bath.
2. Lathe Head
The lathe head is equipped with the components of the index feed rapid transmission mechanism. Open the rear door of the lathe head, there is the exchange hanging wheel for milling cuter speed indexing and feeding. Its major function is to transmit the indexing movement to workpiece supporting workpiece, transmit the feeding movement to the feed screw and transmit the milling cutter rotary movement to the feed rod.

MAIN SPECIFICATIONS

Maximum processing diameter

200mm

Max. Module of the processed teeth

8mm

Max. gradient angle of the teeth of the processed gear wheels

±45

Maximal length of splines to be installed

2500 mm

The maximum Diameters of gears to be Treated

500mm

Maximum Processing length of splines

2300mm

The number of processed spline teeth

4-50

Milling cutter speed Grade

P6

The milling cutter speed range

50-160rpm

The Grade of feeding

12

Feeding range from

0.41-2.97 RPM

distance between the workpiece center and center of hob

50-165mm

Maximum Diameter of installed milling cutter

130mm

Maximum Installation length of milling cutter

110mm

Tool arbors

ø 27 mm ø 32 mm ø 40 mm

Taper of main shaft hole of milling cutter

Morse No. 4

Workpiece spindle sleeve taper

Morse No. 5

Taper of tail frame sleeve hole

Morse No. 5

Axial Movement of milling cutter spindle

40mm


https://www.geeprohobbing.com/products/economical-gp6020.html
SEND INQUIRY
Please fill in fully your information to send email
Your name*
Email*
Company
Address*
Country*
Phone*
Content*
RELATED PRODUCTS RELATED PRODUCTS